Today I was experimenting with setting up PowerSDR-SR40 for use with fldigi and other digital software, and I got everything talking to each other. When everything is working together, it makes operating digital so easy. So far, I got PSDR working with fldigi and Ham Radio Deluxe. I'm planning on getting it working with MMSSTV and EasyPal Digital SSTV program. I dont think there will be any problems, as they should set up the same as the ones I already got working.
There are 2 programs you will need in order to make everything play nice. First is "Virtual Audio Cable". it can be downloaded from here: http://software.muzychenko.net/eng/vac.html
When you get it, you will need to create 2 virtual sound devices. There are good instructions at the above website on doing this. One will be needed for receive, the other for transmit.
The other program you will need, and you will only need it for software that also controls the radio, such as fldigi and Ham Radio Deluxe, and that is "com0com", This creates virtual com ports to link the control aspects together. It can be gotten here: http://com0com.sourceforge.net/
You will need to create 1 pair of com ports for most applications. There are excellent pdf directions on how to do this at the above website.
Then go into Powersdr and set up the "CAT" section. Although some software will work using the identifier set for "SDR-1000", I've had better luck setting up emulating a TS-2000. Under CAT control, set the com port as the lower com port number that you created in the virtual com ports, I used COM5. Fldigi will use COM6 under its CAT settings. I used RIGCAT in Windows to control the SDR, and it plays nice. I have had some problems getting the external programs to control PTT, so I just use VOX for that. I used to use VOX in my Yaesu too when I ran digi modes.
To get audio to the programs, you need to set up virtual audio cable. I used Virtual Audio Cable #1 for audio out from PSDR and VAC #2 for the TX input audio. These settings will be found in the VAC tab in the audio settings in PSDR. The audio settings in fldigi are just the opposite - VAC2 is the output device, and VAC 1 is the input.
Once everything is talking, fldigi will read the frequency of the radio and you can then use the logger in fldigi, and it works like any other radio would with CAT control.
Ham Radio Deluxe sets up in a similar fashion.
To listen to your receive audio, should you choose to do so, VAC has a little utility called an Audio Repeater. You can set that up to input the proper VAC device as the input, and your soundcard that you use for your speaker audio as the output of the repeater.
There you have it, a basic overview as to how to set up different software so they will talk to eachother. Once they talk, operation is a breeze. I worked a little bit of the RTTY contest, and worked about 25 contacts in less than an hour with only 15 watts of TX power.
Good luck, and I hope this helps you get things working with your Software Defined Radio.
Saturday, February 13, 2010
Tuesday, February 9, 2010
SoftRock v6.3 RXTX+Xtall
About 2 weeks ago, I finished building a SoftRock v6.3 RXTX+Xtall SDR transceiver. I ordered the transceiver and 3 power amp, low pass TX filters, so I can cover 80 meters thru 10 meters.
The 6.3 TXRX is a 1 watt PEP transceiver capable of running whatever frequency bands that you supply PA's for. The standard kit allows for 16 presettable (with a 4 section DIP switch) frequencies. Each frequency is tunable over a span of 96 KHz with the software, with the preset dip switch setting being the center of that tuning range. All modes are possible, including SSB, AM, NB FM, and all of the digital modes, including Slow Scan Television using outboard software.
Most of my operation so far has been on WSPR on the 40 meter band, however I have operated SSB on 20 and 40 meters, and have worked a couple of countries using an outboard HFPack amplifier at about 15 watts. The performance is nothing short of remarkable, and have gotten exceptional audio reports while using a VERY cheap computer microphone.
Operating an SDR transceiver requires the use of 2 different sound cards. I use one card that works as the digital signal processor for the radio and the other to drive the speaker on receive and mic for transmit. For the radio card, you want the best sound card you can get, with the lowest noise and highest sample rate. 92 khz sample rate cards are available with noise floors in excess of -100 dB, and they are common and inexpensive. I bought a Soundblaster Audigy card for this purpose, but with many soundblaster internal cards, there is some phase shifting in the card, and I couldnt get a good balance without setting the phase and amplitude all over the place. I've used an older USB card such as the Soundblaster Live external card and that works pretty well. The external cards apparently do not suffer from the phase shifting that the internal cards do.
With the bare transceiver with the fixed frequency settings, the only software that is useable with it is a special version of PowerSDR, called;PowerSDR-SR40 and is available at http://powersdr-sr40.sourceforge.net/. All other versions do not allow you to transmit if the fixed frequency is enabled. There is, however an add on module that allows USB control of the Si570 oscillator that allows continuous tuning, which I ordered but have not received yet.
I will write more stories on this radio, and will detail a little more precisely on setting up this radio for use. It is a fun little rig, and for roughly a $100 investment, you will have yourself a very capable little radio.
The 6.3 TXRX is a 1 watt PEP transceiver capable of running whatever frequency bands that you supply PA's for. The standard kit allows for 16 presettable (with a 4 section DIP switch) frequencies. Each frequency is tunable over a span of 96 KHz with the software, with the preset dip switch setting being the center of that tuning range. All modes are possible, including SSB, AM, NB FM, and all of the digital modes, including Slow Scan Television using outboard software.
Most of my operation so far has been on WSPR on the 40 meter band, however I have operated SSB on 20 and 40 meters, and have worked a couple of countries using an outboard HFPack amplifier at about 15 watts. The performance is nothing short of remarkable, and have gotten exceptional audio reports while using a VERY cheap computer microphone.
Operating an SDR transceiver requires the use of 2 different sound cards. I use one card that works as the digital signal processor for the radio and the other to drive the speaker on receive and mic for transmit. For the radio card, you want the best sound card you can get, with the lowest noise and highest sample rate. 92 khz sample rate cards are available with noise floors in excess of -100 dB, and they are common and inexpensive. I bought a Soundblaster Audigy card for this purpose, but with many soundblaster internal cards, there is some phase shifting in the card, and I couldnt get a good balance without setting the phase and amplitude all over the place. I've used an older USB card such as the Soundblaster Live external card and that works pretty well. The external cards apparently do not suffer from the phase shifting that the internal cards do.
With the bare transceiver with the fixed frequency settings, the only software that is useable with it is a special version of PowerSDR, called;PowerSDR-SR40 and is available at http://powersdr-sr40.sourceforge.net/. All other versions do not allow you to transmit if the fixed frequency is enabled. There is, however an add on module that allows USB control of the Si570 oscillator that allows continuous tuning, which I ordered but have not received yet.
I will write more stories on this radio, and will detail a little more precisely on setting up this radio for use. It is a fun little rig, and for roughly a $100 investment, you will have yourself a very capable little radio.
Thursday, November 12, 2009
New 2 Meter Radio
With all the driving I do with my job, I decided to purchase a new ham radio for my van. I drove up to Amateur Electronic Supply in Cleveland and picked up the new Yaesu FT-1900R. The one I wanted was discontinued, but this is looking more and more like it is a better radio.
One thing that has concerned me is that the new mobile 2 meter rigs run 50+ watts. This one is 55 watts, and the package is so tiny, I was afraid that there wouldnt be enough heat sink to dissipate the kind of heat that a 50 watt final would produce. Turns out the entire bottom of the radio is finned heat sink, and it runs really cool with no temperature rise. Could they be running a class E PA in their rigs now? It would make sense.
Now for the operation of the rig... For a new radio, it is relatively convenient. You do need to reference the user manual, however, as programming the radio involves a few keystrokes, especially when you need to use CTCSS to access a repeater. You can also name the channels so you dont have to remember the frequencies when you tune thru the memories.
Operating the radio is a breeze once its set up. Power level is changed between 4 steps using a front panel button, tuning can be direct entry via the DTMF microphone (standard equipment), or by turning the tuning knob. The receiver has a hot .2 microvolt sensitivity, and the transmit audio is nice and clean. I've made a few QSO's on the radio from the mobile, and I am very pleased with it.
I also started a yahoo group on this radio, and if you have one, you're welcome to join it. The url is at
http://groups.yahoo.com/group/ft-1900r/
One thing that has concerned me is that the new mobile 2 meter rigs run 50+ watts. This one is 55 watts, and the package is so tiny, I was afraid that there wouldnt be enough heat sink to dissipate the kind of heat that a 50 watt final would produce. Turns out the entire bottom of the radio is finned heat sink, and it runs really cool with no temperature rise. Could they be running a class E PA in their rigs now? It would make sense.
Now for the operation of the rig... For a new radio, it is relatively convenient. You do need to reference the user manual, however, as programming the radio involves a few keystrokes, especially when you need to use CTCSS to access a repeater. You can also name the channels so you dont have to remember the frequencies when you tune thru the memories.
Operating the radio is a breeze once its set up. Power level is changed between 4 steps using a front panel button, tuning can be direct entry via the DTMF microphone (standard equipment), or by turning the tuning knob. The receiver has a hot .2 microvolt sensitivity, and the transmit audio is nice and clean. I've made a few QSO's on the radio from the mobile, and I am very pleased with it.
I also started a yahoo group on this radio, and if you have one, you're welcome to join it. The url is at
http://groups.yahoo.com/group/ft-1900r/
Tuesday, September 22, 2009
E-H Antenna
Because of my limited space for antennas, I decided to do a little experimenting with an E-H Antenna. An E-H Antenna is a tiny HF and MW antenna. Originally designed for AM broadcast stations, these antennas supposedly operate with extremely high efficiency, but come in a very small package.
More information at http://www.eh-antenna.com/
I built one for the 30 meter band. The antenna is about 2 feet long, and have the antenna resonant close to the 30 meter band. According to my SWR meter, it currently runs about a 2:1 SWR on 10.139 MHz. I could get the swr down even lower by adjusting the matching coils. I did a rough tuning on mine, and got it close enough for now.
I've read mixed reports by hams who have built these antennas for themselves. Many say they dont work. Here is what I've found so far:
On receive, it seems to pick up a fair amount of noise, but that could be due to antenna placement. I dont have the antenna up very high, only about 10 feet.
On transmit, it appears to do fairly well, even at this height. Signal reports are about even using WSPR. I chose WSPR as an antenna testing mode because every station "advertises" their transmit power, so I can compare transmit vs receive efficiency easily. There is a difference, as my untuned 20 meter hamstick (going thru a tuner in the shack) consistently runs about 10 dB weaker on transmit than in my receiver.
Although this is not paint a complete picture, it does tell me that it works equally well, (or equally poor) between receive and transmit. When I am able to test the antenna when its up a bit higher, I'll be able to make better comparisons.
Watch for me on the 30 meter WSPR freq. I'll be beaconing using this antenna for awhile.
Sunday, September 20, 2009
10 GHz Mountaintop Operations
Saturday, Sept. 19 (2009) was the first time I have operated from a mountaintop on 10 GHz, and I'd like to share some observations from this particular trip. Because this was the first time I have operated from this location, Blue Knob, PA EN00rg, I'd like to tell you what I learned from this trip.
Mountaintop operations such as this tests the capability of your equipment beyond what I have experienced along the lake. Things such as receive sensitivity, pointing accuracy, etc are tested. On this trip, most of the signals are much weaker then what I experienced on Lake Erie.
One thing that was noticed readily on this trip, although our most experienced operator on site, KB8VAO said that this was a fluke, but the 2 meter band conditions were far better than the conditions on 10 GHz. Typically, signals on 10 GHz are much stronger than on 2 meters. Now I have noticed this up on the lake, but I figured this was caused by the duct over the lake being much smaller, and not able to support 2 meters. However, on the mountain, stations in New England were extremely strong on 2 meters, but almost imperceptible on 10 GHz. Many stations had to be worked on CW because the signals were so light. Most of the contacts were a struggle, especially the ones over 100 km away.
Although band conditions were such that there was a 2 meter opening, and 10 GHz seemed flat in comparison, I still managed to break my old personal distance record and worked Vermont which was just under 600 KM away. It was hit and miss for awhile, signal was quite weak, and had to be done on CW. I think next trip, I'm going to bring some form of headphones. I have found that headphones will give you about a 10 dB advantage, at least for me when working extremely weak CW.
The next week or 2, I'm going to compile an equipment checklist, I forgot to bring my code key, and had to borrow one to make the contact.
I worked about a dozen stations total from the mountain, ranging from 60 KM to 600 KM.
Tuesday, September 8, 2009
PowerSDR-IQ with the SoftRock v9.0 Lite+USB Xtall
I've been running the Softrock Xtall+Lite v9.0 with the individual band pass filter boards for several months before I broke down and purchased the Electronically Switched Bandpass Filter about a month ago. Ever since I got it, I had problems getting PowerSDR to switch the filter automatically. I know the filter works because it works fine using Winrad. Today, I got powersdr-iq working with the filter using a fancy little trick that I discovered.
The first thing I did was to uninstall powersdr-iq. I went into windows explorer and deleted what was left in the installed folder. I then went and reinstalled powersdr-iq.
Now here is where it gets tricky. If there is a .dll file in the installed directory called "ExtIO_PMSDR.dll", rename it to something like "EXTIO_PMSDR1.dll". Then go and download ExtIO_Si570.dll and save it in your powersdr-iq folder. Rename the file to "ExtIO_PMSDR.dll". Run Powersdr-iq. Go to setup > General > USB and UNCHECK BOTH boxes under AVR. Then go to the ExtIO tab, under General and check "PM-SDR Enable". Click the "Toolbox" button. You will get another box pop up. If you have Winrad installed and working with the dll for the Softrock, this box will look familiar. If you need help with this box, here's what you need to do with it.
Under "BPF", check "Enable". Normally the info in the band boxes would have for Band 0 1.8 to 4 mhz. I built my BPF so that band 0 is 50 - 54 MHz, so I changed those numbers. I also changed Band 1 to 3 to 7 MHz. You may not have to do this, but by experimenting with the cutoff freq's for MY individual filter, I found these numbers to work best.
I have posted to the usergroups regarding this problem, but it sure seemed that I was the only one that had this problem. I find that hard to believe, but now that I have this new dll installed, I can fully customize the filters, and they switch just like in winrad, probably because its the same software snippet that Winrad uses!
If you have noticed this problem too, give this fix a try. At the very worst, you might need to uninstall psdr and start over. This is all experimental software, and I'm sure that if youre using this stuff, you've probably uninstalled and reinstalled more than once anyway. Its worth a try. Let me know if it works for you too.
The first thing I did was to uninstall powersdr-iq. I went into windows explorer and deleted what was left in the installed folder. I then went and reinstalled powersdr-iq.
Now here is where it gets tricky. If there is a .dll file in the installed directory called "ExtIO_PMSDR.dll", rename it to something like "EXTIO_PMSDR1.dll". Then go and download ExtIO_Si570.dll and save it in your powersdr-iq folder. Rename the file to "ExtIO_PMSDR.dll". Run Powersdr-iq. Go to setup > General > USB and UNCHECK BOTH boxes under AVR. Then go to the ExtIO tab, under General and check "PM-SDR Enable". Click the "Toolbox" button. You will get another box pop up. If you have Winrad installed and working with the dll for the Softrock, this box will look familiar. If you need help with this box, here's what you need to do with it.
Under "BPF", check "Enable". Normally the info in the band boxes would have for Band 0 1.8 to 4 mhz. I built my BPF so that band 0 is 50 - 54 MHz, so I changed those numbers. I also changed Band 1 to 3 to 7 MHz. You may not have to do this, but by experimenting with the cutoff freq's for MY individual filter, I found these numbers to work best.
I have posted to the usergroups regarding this problem, but it sure seemed that I was the only one that had this problem. I find that hard to believe, but now that I have this new dll installed, I can fully customize the filters, and they switch just like in winrad, probably because its the same software snippet that Winrad uses!
If you have noticed this problem too, give this fix a try. At the very worst, you might need to uninstall psdr and start over. This is all experimental software, and I'm sure that if youre using this stuff, you've probably uninstalled and reinstalled more than once anyway. Its worth a try. Let me know if it works for you too.
Wednesday, September 2, 2009
1296 update
I had just finished rebuilding my 1296 rig and assembled the modules. I added a 3 pole bandpass filter between the transverter output and the 10 dB gain block that drives the 2 watt PA. When I initially tested, I wasnt getting any power out of the rig, so I proceeded to test for RF at each stage.
I was getting the usual milliwatt or two out of the transverter., but at the output of the filter, there was nothing. I retuned the filter for max output. I lost about 3 dB thru the filter.
After hooking up the low level amplifier, the measured output was about +8 dBm. A little lower than I expected, but it's enough to drive the 2 watt amplifier to a useable output level. A quick check at the 2 watt PA output indicated a healthy output. I then determined that I had the antenna relay hooked up backward, RX line going to the TX port, etc.
Once I got it all hooked up, there was an oscillation, which I cured by shielding the low level amplifier. The output is a little low, i think, but I still believe it is enough to so some good mountaintop work. I believe I can get a little more out of the transverter, however, so I'm sure I can get the power level up to where it should be. I guess the level to shoot for is +10 dBm out of the low level amplifier. So, it looks like I'm capable of getting on 1296 now.
I was getting the usual milliwatt or two out of the transverter., but at the output of the filter, there was nothing. I retuned the filter for max output. I lost about 3 dB thru the filter.
After hooking up the low level amplifier, the measured output was about +8 dBm. A little lower than I expected, but it's enough to drive the 2 watt amplifier to a useable output level. A quick check at the 2 watt PA output indicated a healthy output. I then determined that I had the antenna relay hooked up backward, RX line going to the TX port, etc.
Once I got it all hooked up, there was an oscillation, which I cured by shielding the low level amplifier. The output is a little low, i think, but I still believe it is enough to so some good mountaintop work. I believe I can get a little more out of the transverter, however, so I'm sure I can get the power level up to where it should be. I guess the level to shoot for is +10 dBm out of the low level amplifier. So, it looks like I'm capable of getting on 1296 now.
Saturday, August 22, 2009
1296 2W Amp Update
I got the 2 watt 1296 amplifier working Friday evening. I have had some problems with it when I was working on it. Let me give you a history before I go on.
The active device is a Motorola SML7008, which is known to work on 1296, but with slightly reduced RF output. This was aquired on eBay as a kit.
A couple weeks ago, I installed the circuit on an aluminum pallet ready to install in the enclosure that I planned on using. After it was assembled, I installed a couple of SMA connectors, connected it to a 20V Dell laptop power supply, terminated the input and put my power sensor on the output.
When I powered it up, the unit oscillated. I tried all of the usual fixes - conductive foam, etc... to no avail. The PC board that came with the kit used single sided material, with 2 mounting holes for the board and the active chip is flange mounted with 2 holes.
The fix was...I installed some flashing on the top side of the board, wrapped it around to the bottom, and screwed the board down against the flashing to the aluminum pallet. This is what eventually fixed the amp.
Now, when I was testing the amplifier earlier, I discovered the transverter power output was a tad bit low. This amplifier likes 10 milliwatts on the input for full output. I'm getting about 2 mW. The output spectrum isnt as clean as I'd like either, so I'm planning on building a 3 resonater filter and will place that on the output of the transverter, and a MMIC amplifier following that, to drive the 2 watt amplifier. I'm guessing the filter will have about 3 dB or so of loss, so the MMIC should work out just fine. I will probably be using a MSA-1105 for the active device. I still need to look up the device specs, gain, etc., but I believe it should work out. Once I get this done, I'll be packaging the thing up and will try some line of sight contacts with it using one of my 10 element yagi's. Of course I'll keep you posted as to how it comes along.
The active device is a Motorola SML7008, which is known to work on 1296, but with slightly reduced RF output. This was aquired on eBay as a kit.
A couple weeks ago, I installed the circuit on an aluminum pallet ready to install in the enclosure that I planned on using. After it was assembled, I installed a couple of SMA connectors, connected it to a 20V Dell laptop power supply, terminated the input and put my power sensor on the output.
When I powered it up, the unit oscillated. I tried all of the usual fixes - conductive foam, etc... to no avail. The PC board that came with the kit used single sided material, with 2 mounting holes for the board and the active chip is flange mounted with 2 holes.
The fix was...I installed some flashing on the top side of the board, wrapped it around to the bottom, and screwed the board down against the flashing to the aluminum pallet. This is what eventually fixed the amp.
Now, when I was testing the amplifier earlier, I discovered the transverter power output was a tad bit low. This amplifier likes 10 milliwatts on the input for full output. I'm getting about 2 mW. The output spectrum isnt as clean as I'd like either, so I'm planning on building a 3 resonater filter and will place that on the output of the transverter, and a MMIC amplifier following that, to drive the 2 watt amplifier. I'm guessing the filter will have about 3 dB or so of loss, so the MMIC should work out just fine. I will probably be using a MSA-1105 for the active device. I still need to look up the device specs, gain, etc., but I believe it should work out. Once I get this done, I'll be packaging the thing up and will try some line of sight contacts with it using one of my 10 element yagi's. Of course I'll keep you posted as to how it comes along.
WSPR Beaconing
This looks to be a great mode. It decodes signals up to about -29 dB below the noise floor, uploads the spots to a realtime database and plots them on a google map. Most stations run about a watt or two, with some running a couple hundred milliwatts. This is an USB digital mode. Bandwidth is a whopping 6 hz! It does not take much power to be heard.
There are stations on most of the HF bands, however most are concentrated on 30 meters. Again, I would like to see some activity on bands like 2 meters, as being the extremely weak signal properties of this mode, it would be beneficial in showing enhancements on the VHF bands. So far, I have not seen any activity on 2 meters.
Although this is an excellent mode, I dont have a good working antenna for 30 meters, so my transmitted signals are typically down about 15 dB from others on the band. Until more activity starts to show up on bands above 10 meters, my activity on this mode will be limited, I believe. This is a personal preference, I would operate more if I had a 30 meter hamstick, which I may end up getting at some point, but for now, I will probably keep beaconing on PropnetPSK.
Tuesday, August 18, 2009
10 GHz & Up Cumulative Contest Part 1
Part one of the 10 GHz & Up contest was August 15 & 16th, 2009. I operated Sunday for a couple of hours on Lake Erie along with WA3TTS and KB8VAO at grid EN91kt. I would have stayed all day like they did, but I was on call at work for 13 radio stations, so I cut it short, just in case.
Although I only operated from about 9AM - noon, I managed to work 10 stations. A large number of VE3's were roving across the lake, into Michigan and around to Ohio. Unfortunately, I did not work them all at every stop, as I left around noon.
Veteran microwave operator, KB8VAO operated the lake both Saturday & Sunday. I dont know how many QSO's he had, but I'm sure he did quite well, as the band was even better on Saturday than Sunday.
Mike, WA3TTS worked 20 QSO's on Sunday. He spent all day there, and this was his first time out on the lake operating with any real seriousness. Mike was up on the lake last year during a microwave activity day running a milliwatt or 2, but his receiver was confirmed working perfectly. Now that Mike has had a taste of some 10 GHz operation, I'm sure he will be quite active in the future. Mike is also planning on building a beacon for 1296 and 10 GHz.
This was a really fun event. It adds a new dimension when you get to operate with other microwaver's. Steve coordinated the operation because he was running the most power and was the most experienced among us. I have to thank Steve because if it wasnt for him, I dont believe we would have done as well as we have.
Now for the 2nd part of the contest, there is talk that Saturday, we operate from Lake Erie again, and from Blue Knob, a mountain in south central Pennsylvania. I have never done a mountaintop operation before, so I'm sure that will be an interesting operation. From what I hear, the long haul DX possibilities are nothing short of incredible, so I cant wait to do something from there. I went to the mountain last summer to check it out, but havent operated the mountain. You can see for miles in every direction, so no doubt, 10 GHz will go a long way from there.
Subscribe to:
Posts (Atom)
